魏博鑫

2006.09-2010.07 哈尔滨工业大学材料科学与工程工学学士

2010.09-2013.04 航天动力技术研究院材料加工工程（推荐免试）工学硕士

2013.07-2018.10 哈尔滨工业大学材料学工学博士

2014.10-2018.10 中国工程物理研究院核物理与化学研究所联合培养

2015.06-2015.09 荷兰格罗宁根大学应用物理短期访学

2018.12-2024.11 哈尔滨理工大学     材料科学与工程          博士后

2018.12-2022.08 哈尔滨理工大学     材料成型系     讲师

2018.12-至今黑龙江省轻金属材料改性与绿色成形技术重点实验室骨干成员

2019.09-至今哈尔滨理工大学     材料成型系     硕士生导师

2020.12-至今哈尔滨理工大学     材料成型系     党支部书记

2022.09-至今哈尔滨理工大学     材料成型系     副教授

2023.06-至今哈尔滨理工大学     材料成型系     博士生导师

研究方向——难熔金属及其碳化物陶瓷的组织调控及核用性能

1. 高性能难熔碳化物-碳化硅复合材料低温制备；

2. 超高温碳化物陶瓷辐照损伤机制与核能应用；

3. 钨基碳化物复合材料可控制备与极端环境应用。

近五年来主持/参与国家级/省部级科研项目9项。

1. 国家自然科学基金青年项目(52002098）：反应烧结(Zr,Ti)(C,N)x- SiC复相陶瓷的显微组织调控与辐照损伤机理, 2021.01-2023.12, 主持

2. 黑龙江省自然科学基金联合引导项目(LH2023E080): 新型核用碳化物纳米复合材料的低温制备及环境损伤机理研究, 2023.07-2026.07，主持

3. 黑龙江省博士后科研启动金项目(2901051715)：碳化物基超高温陶瓷的微观组织调控，2024.12-2027.12，主持

4. 国家自然科学基金重点项目(51532006): 陶瓷固溶分相规律及其烧结熔体调控原理, 2016.01-2020.12, 参与

5. 国家自然科学基金面上项目(51772065): 多铁性织构陶瓷的微观电、热输运机制研究, 2018.01-2021.12, 参与

6. 国家自然科学基金青年项目(51602074): 氮化硼-氧化锆复合材料的低温致密化行为与抗钢水侵蚀机理, 2017.01-2019.12, 参与

7. 黑龙江省自然科学基金杰出青年项目(JQ2022E004): 镁合金连续变通道直接挤压成形组织性能调控及强塑性双增机制, 2022.07-2025.07，参与

8. 湖北省自然科学基金联合基金项目(2025AFD102): 碳氮化物中熵陶瓷基金属复合材料的制备及摩擦磨损机制研究, 2025.03-2027.03, 参与

9. 湖北省自然科学基金联合基金项目(2025AFD040): 碳化物高熵陶瓷基金属复合材料的组成-结构调控及切削性能研究, 2025.03-2028.03, 参与

主讲课程：

本科生课程：《材料性能与分析测试技术》、《工程材料学》、《快速成型及3D打印技术》

硕士生课程：《材料科学前沿讲座》、《金属材料工程前沿讲座》

博士生课程：《先进材料制备技术》

招生规模：博士生1人/届，硕士生3~4人/届；

素质要求：诚邀勤奋刻苦、乐于专研、外语水平良好的同学加入。

专业要求：材料类相关专业，金属材料、无机非金属材料、材料加工等相关专业均可

1.      魏博鑫，高云峰，姜威，王李卫，房文斌. 原位生成WSi₂增强(Ti,W)C基金属陶瓷材料及其制备方法和在刀具中的应用, CN202310939266.1, 2023.07.

2.      魏博鑫，王李卫，柏文龙，武钰龙，房文斌. 多形态微结构SiC-TiB-2-Ti-3SiC-2强化的复合陶瓷及其制备方法和应用，CN202311206508.2, 2023.09.

3.      魏博鑫，万陈明哲. 一种金属材料表面处理设备, CN202311035000.0, 2023.08.

4.      魏博鑫, 梁岚青, 李学问, 房文斌.一种烧结法制备钛副族碳氮化物固溶体复相陶瓷材料的方法, CN202111205368.8, 2021.10.

5.      魏博鑫, 张孟孟, 李学问, 房文斌.一种反应热压烧结法低温制备碳氮化物-硅化物固溶体复相陶瓷的方法, CN202111293798.X, 2021.11.

6.      魏博鑫，梁岚青，柏文龙，房文斌. 一种基于ZrSi-Ti3SiC3的高韧性复合陶瓷及其制备方法和应用, CN202211231975.6，2022.10.

7.      万陈明哲，魏博鑫，孙思文. 一种金属焊接辅助工装, CN202311071385.6, 2023.08.

8.      李学问, 魏博鑫, 王东伟, 赵贝, 房文斌. 一种用于丝材拉拔的夹具. CN112157130A, 2021-01-01.

9.      李学问, 王东伟, 魏博鑫, 房文斌. 一种基于拉拔工艺快速制备镁合金细晶丝材及超细镁合金丝材的方法. CN110193525A，2020-08-18.

10.  孙安琪, 李学问, 魏博鑫, 房文斌, 刘刚. 一种带锥度薄壁管成形热压模具.CN210121640U, 2019-05-14.

11.  赵贝, 李学问, 魏博鑫, 房文斌, 王东伟. 一种用于拉拔丝材的拉拔盘丝装置. CN209953533U. 2019-05-14.

12.  房文斌, 杨勇群，王东伟，魏博鑫，李学问.一种用于丝材拉拔的爪型夹具. CN112058929A, 2020-09-23.

13.  陈磊，王玉金，魏博鑫，贾德昌，周玉. 薄带连铸用氮化硼复相陶瓷侧封板及其制备方法. CN201510689631.3, 2015-10-21.

近年来先后在Journal of the European Ceramic Society、Ceramcis International、International Journal of Refractory Metals and Hard Materials等国际知名期刊发表SCI论文50余篇，代表性论文如下：

1.      Liwei Wang, Boxin Wei*, Dong Wang, et al. (Ti, Ta)C-(Ti, Ta)B2-SiC based ceramics with core-rim structure by in-situ reaction sintering at low temperature: Formation mechanism and enhanced mechanical properties. Journal of Materials Science & Technology, 2026, 246:167-186.

2.      Yulong Wu, Boxin Wei*, Sijia Huo, et al. Effects of Sintering Temperature and Composition on the Microstructure and Properties of Al2O3-GdAlO3 Multiphase Ceramics via Reactive Pressureless Sintering. Journal of Materials Engineering and Performance, 2025, https://doi.org/10.1007/s11665-025-12072-x.

3.      Boxin Wei*, Jia Yao, Liwei Wang, et al. Intra/inter-type SiC-Ti3SiC2 reinforced (Ti,Zr)C ceramics via multi-scale microstructure design, Journal of the European Ceramic Society, 2025, 45(16): 117713.

4.      Ruiqing Zhao, Boxin Wei*, Liwei Wang, et al. Reactive hot-pressing of ultrafine dual phase high-entropy (Ti,Zr,Hf,Nb,Ta)C-SiC ceramics with enhanced mechanical properties. Ceramics International, 2025, 51(22):36511-36524.

5.      Jia Yao, Boxin Wei*, Qinghua Hou, et al. Core-shell structure-designed TiC-based ceramics with synergistic strength-toughness via low-temperature in-situ reaction sintering. International Journal of Refractory Metals and Hard Materials, 2025, 132:107276.

6.      Yulong Wu, Boxin Wei*, Sijia Huo*, Jia Yao, Lei Chen, Yujin Wang. High-performance Al2O3-GdAlO3-SiC multiphase ceramics with enhanced mechanical and thermophysical properties prepared by reactive pressureless sintering. Materials Today Communications, 2025, 45, 112253.

7.      Wenlong Bai, Lei Chen*, Boxin Wei*, et al. The effect of particle size gradation on the microstructure, mechanical and thermal physical properties of BN-ZrO₂-SiC composites. Journal of Materials Research and Technology, 2024, 33:8091-8098.

8.      Liwei Wang, Boxin Wei*, Dong Wang, et al. Novel α/β SiC-(Ti, Nb)B2 toughened (Ti, Nb)C-based composites with enhanced mechanical properties fabricated by in situ reactions sintering at low temperature. Ceramics International, 2024, 50: 46211-46226.

9.      Boxin Wei*, Liwei Wang, Wei Jiang, et al. Design, preparation, and enhanced mechanical properties of novel plate-like grains toughened (Zr, Ti, W, Ta)C medium-entropy ceramics fabricated by in-situ reaction hot-pressing, Journal of Materials Research and Technology, 2024, 31:2945-2960.

10.  Wanying Du, Xin Wang, Boxin Wei*, et al. Enhanced fracture toughness of Ti2AlNb/Ti6Al4V layered metal composite, Materials Science and Engineering: A, 2024, 909: 146759.

11.  Liwei Wang, Boxin Wei*，Jia Yao, et al. Novel Ti₃SiC₂-(Ti, Zr)B₂ toughened (Ti, Zr)C-based composites with enhanced mechanical properties fabricated by dual in situ reactions hot-pressing at low temperature, Journal of Materials Research and Technology, 2024, 30:8822-8840.

12.  Boxin Wei*, Wei Jiang, Dong Wang, et al. Dual plate-like grains of (Ti, Zr)B2 and W2B5 toughened solid solution composites fabricated via in-situ reaction spark plasma sintering of (Ti, W)C and ZrB2 powders, Journal of the European Ceramic Society, 2024, 44(11): 6206-6222.

13.  Boxin Wei*, Yunfeng Gao, Liwei Wang, et al. Novel (Ti, W)C–SiC–WSi2 ceramics fabricated via in situ reaction spark plasma sintering at 1600 °C, Ceramics International, 2024, 50:14907-14918.

14.  Liwei Wang, Boxin Wei*, Mengmeng Zhang, et al. Oxidation behavior and kinetics of (Zr, Ti)(C, N)–SiC ceramics with enhanced oxidation resistance at 850 °C–950 °C, Journal of Materials Research and Technology, 2023, 27:6744-6755.

15.  Lanqing Liang, Boxin Wei*, Mengmeng Zhang, et al. Novel TiC-based ceramic with enhanced mechanical properties by reaction hot-pressing at low temperature, Journal of Materials Research and Technology, 2023, 24:2129-2143.

16.  Mengmeng Zhang, Boxin Wei*, Lanqing Liang, et al. Microstructures and enhanced mechanical properties of (Zr, Ti)(C, N)-based nanocomposites fabricated by reactive hot-pressing at low temperature, Materials, 2023, 16(6): 2145.

17.  Lanqing Liang, Boxin Wei*, Dong Wang, et al. Densification, microstructures, and mechanical properties of (Zr, Ti)(C, N) ceramics fabricated by spark plasma sintering, Journal of the European Ceramic Society, 2022, 42(14): 6445-6456.

18.  Mengmeng Zhang, Boxin Wei*, Dong Wang, et al. Novel (Zr, Ti)(C, N)-SiC ceramics via reactive hot-pressing at low temperature; Ceramcis International, 2022,48(20):29641-29651.

19.  Boxin Wei, Lei Chen, Yujin Wang*, et al. Densification, mechanical and thermal properties of ZrC1−x ceramics fabricated by two-step reactive hot pressing of ZrC and ZrH2 powders, Journal of the European Ceramic Society, 2018, 38(2): 410-418.

20.  Boxin Wei, Dong Wang, Yujin Wang*, et al. Microstructure Evolution in ZrCx with Different Stoichiometries Irradiated by Four MeV Au Ions, Materials, 2019, 12: Article ID 3768.

21.  Boxin Wei, Yujin Wang*, Haibin Zhang*, et al. Microstructure evolution of nonstoichiometric ZrC0.6 with ordered carbon vacancies under ion irradiation, Materials Letters, 2018, 228: 254-257.

22.  Boxin Wei, Dong Wang, Yujin Wang*, et al. Corrosion kinetics and mechanisms of ZrC1-x ceramics in high temperature water vapor, RSC Advances, 2018, 8: 18163-18174.

23.  Boxin Wei, Yujin Wang*, Yanwei Zhao, et al. Effect of NbC content on microstructure and mechanical properties of W-NbC composites, International Journal of Refractory Metals and Hard Materials, 2018, 70: 66-76.

24.  Xinyu Huang, Yongshan Fu, Dong Wang, Boxin Wei, et al. TiB2-based composite ceramics with core-shell structure by in situ reactive sintering with enhanced density and properties, Ceramics International, 2025, 10.1016/j.ceramint.2025.09.431.

25.  Wanying Du, Xin Wang, Boxin Wei, et al. Influence of the interface layer on the fracture toughness of Ti2AlNb/Ti6Al4V layered metal composite, Composites Communications, 2025, 59: 102580.

26.  Binkai Yang, Boxin Wei, Wuying Fu, et al. Effect of interfacial reaction layers on crack propagation behavior of Ti/Al layered metal composites in uniaxial tensile test from the perspective of local strain. Materials Science and Engineering: A, 2025, 942: 148669.

27.  Weiyan Liu, Xin Wang, Wenbin Fang, Boxin Wei, et al. Effect of Hot Rolling on Microstructure and Mechanical Properties of WE43 Rare-Earth Magnesium Alloy, Journal of Materials Engineering and Performance, 2025, 10.1007/s11665-025-11339-7.

28.  Weiyan Liu, Boxin Wei, Rengeng Li, et al. Research Progress on Texture Regulation of Rare-Earth Magnesium Alloys, Solids, 2025, 6(1):11.

29.  Yaning Zhang, Xingyu Huang, Dong Wang, Boxin Wei, et al. Electrical discharge machinable intra/inter type B4C composites with enhanced mechanical properties by two-step reactive spark plasma sintering. Journal of the European Ceramic Society, 2025, (45)2: 116912.

30.  Yaning Zhang, Xingyu Huang, Dong Wang, Boxin Wei, et al. Microstructure and mechanical properties of pressure-less sintered B₄C-SiC-ZrB₂-LaB₆ ceramic composites. International Journal of Applied Ceramic Technology, 2024, 21(6):4168-4180.

31.  Qingyi Kong, Rao Zhang, Lei Chen, Sijia Huo, Wenyu Lu, Yujin Wang, Boxin Wei, et al. Phase transition of multi-component (TiZrVNb)C ceramics- Part I: Phase decomposition induced by carbon content. Journal of Advanced ceramics, 2024, 13(5): 679-688.

32.  Dong Wang, Yaning Zhang, Yaoming Jiao, Boxin Wei, et al. Reactive spark plasma sintering of an electrically conductive B4C-SiC-ZrB2 composite with enhanced mechanical properties. Journal of the European Ceramic Society, 2024, 44(5): 2720-2729.

33.  Wen Zhang, Kunxuan Li, Lei Chen, Zhan Shi, Sijia Huo, Boxin Wei, et al. The phase decomposition in non-equimolar (ZrHfVNbMoW)Cx complex concentrated carbides via carbon content regulation. Journal of the European Ceramic Society, 2024, 44(3): 1396-1403.

34.  Jin Qin, Long Li, Boxin Wei, et al. High temperature stability “Li+–Al3+” co-doped BaTiO3 piezoelectric ceramic. Journal of Materials Science: Materials in Electronics, 2023, 34(25): 1788.

35.  Dong Wang, Yaning Zhang, Kai Xu, Boxin Wei, et al. Novel low temperature derived Wf/W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties, Journal of Materials Research and Technology, 2023, 24: 8065-8076.

36.  Dong Wang, Kai Xu, Boxin Wei, et al. Microstructure and Mechanical Properties of ZrCx-NbCy-Cu Composites by Reactive Infiltration at 1 300 degrees C. Journal of Wuhan University of Technology-Materials Science Edition, 2023, 38(1): 52-58.

37.  Tianze Liu, Xuewen Li, Boxin Wei. The Influences of Heat Treatment on the Microstructure and Mechanical Properties of Rolled Ti2AlNb. Metals, 2023, 13(5): 886.

38.  Lei Chen, Wen Zhang, Wenyu Lu, Boxin Wei, et al. Low thermal conductivity of dense (TiZrHfVNbTa)C-x high-entropy carbides by tailoring carbon stoichiometry. Journal of Advanced Ceramics, 2023, 12(1): 49-58.

39.  Xuchen Jin, Peihao Ye, Hongrui Ji, Zhuanxia Suo, Boxin Wei, et al. Oxidation resistance of powder metallurgy Ti-45Al-10Nb alloy at high temperature. International Journal of Minerals Metallurgy And Materials, 2022, 29(12): 2232-2240.

40.  Dong Wang, Kai Xu, Boxin Wei, et al. Microstructure and Mechanical Properties of Continuous Tungsten Fiber-Reinforced Tungsten-Zirconium Carbide-Copper Composites by Reactive Infiltration. JOM, 2022, 74(11): 4307-4316.

41.  Xuchen Jin, Peihao Ye, Wenbin Fang, Wei Sun, Zhuanxia Suo, Boxin Wei, et al. Microstructure, Thermal Insulation, and High-Temperature Mechanical Properties of Layered Porous High Nb-TiAl Composite Sheets. JOM, 2021, 73(12): 3753-3760.

42.  Peihao Ye, Wenbin Fang, Boxin Wei, et al. Microstructures and mechanical properties of Ti-45Al-10Nb alloy produced by ball milling and hot press consolidation. Ferroelectrics, 2021, 581(1): 64-72.

43.  Wen Zhang, Lei Chen, Wenyu Lu, Sijia Huo, Boxin Wei, et al. Non-stoichiometry of (TiZrHfVNbTa)Cx and its significance to the microstructure and mechanical properties. Journal of the European Ceramic Society, 2022, 42(14): 6347-6355.

44.  Yujin Wang, Dong Wang, Taiquan Zhang, Guiming Song, Lei Chen, Boxin Wei, et al. Refractory carbide reinforced tungsten matrix composites. Journal of Alloy and Compounds, 2022, 925: 166342.

45.  Dong Wang, Boxin Wei, Yujin Wang, et al. Microstructure and mechanical properties of intragranular W-Cu/TiC-ZrC composite prepared by reactive melt infiltration at 1300 °C. Materials Characterization, 2018, 138: 89-97.

46.  Dong Wang, Yujin Wang, Boxin Wei, et al. Effect of W content on the ablation properties of W-ZrC composites synthesized by reactive melt infiltration under oxyacetylene flame. International Journal of Refractory Metals and Hard Materials, 2018, 74: 28-39.

47.  Dong Wang, Hongtao Chen, Yujin Wang, Boxin Wei, et al. Precipitations of W/Cu metallic phases in ZrC in the reactive melt infiltrated ZrC/W composite. Journal of Alloys and Compounds, 2021, 843:155919.

48.  Daren Wu, Geng Huangfu, Dong Wang, Boxin Wei, et al. Microstructure and mechanical properties of ZrC-TaCx composite fabricated by displacive compensation of porosity at 1300 °C. Ceramics International, 2018, 324(1): 246-253.

49.  Fangwei Wang, Yujin Wang, Lei Chen, Boxin Wei, et al. Effects of surface oxygen on carbon films synthesized by plasma enhanced chemical vapor deposition. Materials Letters, 2016, 182: 52-54.